This Is The Chimney Sweep’s Standard Brush! It is made from heavy duty steel components: 22 gauge (.0286") diameter oil-tempered wire; laid in the four wire, seven gauge spindle two on two, and pre-measured, thus giving a uniform, rugged distribution of brush fill. The brush is twisted on a 3/8" pipe threaded, plated, machined nipple. These brushes are used by 90% of the chimney sweeps in the United States for cleaning creosote from wood heating systems.
The Fiberglass Extension Rods contain approximately 70% long filament glass to give high strength and flexibility. A special resin allows the rods to flex to a maximum radius of 1.5 feet. Medium-duty (.440" diameter, 3/8" PT) black rods are available. For professional use there is the .480" diameter yellow rod with 3/8" PT connections.
Quick-Disconnect coupling plug locks into socket when pushed together; to disconnect simply twist the socket’s spring-loaded ring. These save time on every job, and are required by most professional sweeps.
Pipe Thread Loop has a 1/2" loop hole in end. Allows rope to be attached to brushes for double hauling.
Male quick disconnect adapter for 3/8'' threaded chimney rods. Works together with part #7139 (socket, pictured). Finish may not match…
$24.59
Female quick disconnect adapter for 3/8'' threaded chimney rods. Works together with part #7137 or #7138 (pictured). Finish may not…
$57.19
This allows the use of 3/8" threaded brushes and rods with 1/4" threaded brushes or rods.…
$9.39
Displaying 1 to 20 (of 32 products)