The Rugged Stainless Steel Chimney That Makes Every Installation Simple, Fast And Sound.
Ultra-Temp Chimney, in 10"diameter, is ideal for venting natural and LP gas, #2 oil and open front wood burning appliances. The anchor plate allows the use of this chimney on masonry fireplaces.
Standard Stainless Steels are used for all insulated parts. The smooth stainless steel inner liner produces rapid stabilization of strong draft and heats fast to minimize condensation as waste gases are exhausted. The insulation in the pipe assures the highest possible inner wall temperature by preventing circulation of air between inner and outer chimney walls. This special insulation filling the space between the stainless steel walls is only 1" thick, yet it provides 17 times the insulating value of brick.
Selkirk’s chimney can be easily installed by one man. The chimney sections have threaded internal couplers that lock together in seconds with a 1/8 turn. Locking Bands are furnished with every pipe length to assure complete joint security. These systems come with a variety of components to meet every installation requirement.
Selkirk Ultra-Temp has been tested to 1700°F. These high temperature tests comply with Underwriter’s Laboratories Safety Standard for Factory-Built Chimneys, UL-103 Sixth Edition.
Limited Lifetime Warranty
Refer to manufacturer’s instructions for proper installation, usage, and maintenance.
The Roof Support Kit includes the roof brackets and hardware only.
Works on all diameters of chimney. Allows freedom to install…
Used where the chimney passes through a roof with a pitch of flat to 6/12…
Includes two elbows, two locking bands and an interior resupport. Click picture for detailed description.The 15 degree Insulated Elbow can…
Includes two elbows, two locking bands and an interior resupport. Click picture for detailed description.The 30 degree Insulated Elbow can…
A Roof Brace Kit can be used whenever there is a need to stabilize the chimney above the roof level.…
18" Chimney Section has an installed length of 18" and can be intermixed with various lengths to attain virtually any…
36" Chimney Section has an installed length of 36" and can be intermixed with various lengths to attain virtually any…
10" Chimney Section has an installed length of 6" and can be intermixed with various lengths to attain virtually any…
Chimney Section has an installed length of 9" and can be intermixed with various lengths to attain virtually any height.…
The Adjustable Pitched Ceiling Plate gives a finished appearance where the chimney passes through a sloped ceiling. Adjustable for various…
The Joist Shield / Firestop is used to dissipate heat wherever the chimney passes a joist from or into an…
Flashings are used to seal the opening where the chimney penetrates the roof to divert rain and snow down from…
The Insulated Chimney Tee may be used to start chimneys indoors or outdoors using a Wall Support Assembly or a…
Our Insulated Wall Thimble installs quickly and eliminates the need for using individual firestops. Interior plate has black matte finish.…
Used to provide additional support of chimney, especially when using chimney offsets.Interior resupport assembly allows for two different methods of…
Use to assure complete joint security. Allows chimney to be taken apart without damage to the joint so it can…
An ideal support assembly for freestanding fireplaces and open cathedral ceiling installations. Fits all roof pitches and requires only simple…
Made of flexible expanded 18-8 stainless steel mesh with diamond shaped openings
roughly 1/2 x 1 inch. Use to keep…
The Storm Collar is designed to fit on the round chimney pipe just above the roof flashing. The upper edge…
The Wall Band is used along wall to provide for 2-inch clearance and assure stability. Also useful for suspending offsets.…