The Rugged Stainless Steel Chimney That Makes Every Installation Simple, Fast And Sound.
Standard Stainless Steels are used for all insulated parts. The smooth stainless steel inner liner produces rapid stabilization of strong draft and heats fast to minimize condensation as waste gases are exhausted. The insulation in the pipe assures the highest possible inner wall temperature by preventing circulation of air between inner and outer chimney walls. This special insulation filling the space between the stainless steel walls is only 1" thick, yet it provides 17 times the insulating value of brick.
Selkirk’s chimney can be easily installed by one man. The chimney sections have threaded internal couplers that lock together in seconds with a 1/8 turn. Locking Bands are furnished with every pipe length to assure complete joint security. These systems come with a variety of components to meet every installation requirement.
Selkirk Type HT chimneys have been tested to 2100°F. These high temperature tests comply with Underwriter’s Laboratories Safety Standard for Factory-Built Chimneys, UL-103 Sixth Edition.
Limited Lifetime Warranty
Refer to manufacturer’s instructions for proper installation, usage, and maintenance.
The Wall Band is used along wall to provide for 2-inch clearance and assure stability. Also useful for suspending offsets.…
The Roof Support Kit includes the roof brackets and hardware only.
Works on all diameters of chimney. Allows freedom to install…
For use in existing installations, this part can be installed into the first section of Platinum Series Type HT chimney…
A Roof Brace Kit can be used whenever there is a need to stabilize the chimney above the roof level.…
Used to support a vertical wall installation above the tee or above an offset. It can also serve as an…
18" Chimney Section has an installed length of 18" and can be intermixed with various lengths to attain virtually any…
36" Chimney Section has an installed length of 36" and can be intermixed with various lengths to attain virtually any…
48" Chimney Section has an installed length of 48" and can be intermixed with various lengths to attain virtually any…
8" Chimney Section has an installed length of 6" and can be intermixed with various lengths to attain virtually any…
Chimney Section has an installed length of 9" and can be intermixed with various lengths to attain virtually any height.…
Universal Interior Resupport assembly allows for two different methods of chimney resupport. The first method is used when an immediate…
This new design attaches around chimney providing vertical support at the roof. This support assembly has a heavy duty clamping…
This adapter is designed to be installed onto the end of a Selkirk Ultra Temp series chimney section before insertion…
Fits 2/12 to 6/12 pitch. Made with a very soft aluminum base that can be easily molded to fit uneven…
The Adjustable Pitched Ceiling Plate gives a finished appearance where the chimney passes through a sloped ceiling. Adjustable to fit…
Insulated Tee plug used to cover opening at bottom of tee. can be removed from bottom opening for inspection and…
A UL-listed kit to allow rubber boot flashings to be used safely for chimney installations on metal roofs. Includes rubber…
Includes two elbows, two locking bands and an interior resupport.The 15 degree Insulated Elbow can be used for fixed offsets…
Includes two elbows, two locking bands and an interior resupport.The 30 degree Insulated Elbow can be used…
Flashings are used to seal the opening where the chimney penetrates the roof to divert rain and snow down from…