The Rugged Stainless Steel Chimney That Makes Every Installation Simple, Fast And Sound.
Standard Stainless Steels are used for all insulated parts. The smooth stainless steel inner liner produces rapid stabilization of strong draft and heats fast to minimize condensation as waste gases are exhausted. The insulation in the pipe assures the highest possible inner wall temperature by preventing circulation of air between inner and outer chimney walls. This special insulation filling the space between the stainless steel walls is only 1" thick, yet it provides 17 times the insulating value of brick.
Selkirk’s chimney can be easily installed by one man. The chimney sections have threaded internal couplers that lock together in seconds with a 1/8 turn. Locking Bands are furnished with every pipe length to assure complete joint security. These systems come with a variety of components to meet every installation requirement.
Selkirk Type HT chimneys have been tested to 2100°F. These high temperature tests comply with Underwriter’s Laboratories Safety Standard for Factory-Built Chimneys, UL-103 Sixth Edition.
Limited Lifetime Warranty
Refer to manufacturer’s instructions for proper installation, usage, and maintenance.
Use to assure complete joint security. Allows chimney to be taken apart without damage to the joint so it can…
The Storm Collar is designed to fit on the round chimney pipe just above the roof flashing. The upper edge…
The Finishing Collar fits over lower end of suspended insulated chimney pipe to provide finished appearance. Used to attach T-DSA…
Made of flexible expanded 18-8 stainless steel mesh with diamond shaped openings roughly 1/2 x 1 inch. Use to keep…
Insulated Tee plug used to cover opening at bottom of tee. can be removed from bottom opening for inspection and…
The Wall Band is used along wall to provide for 2-inch clearance and assure stability. Also useful for suspending offsets.…
This adapter is designed to be installed onto the end of a Selkirk Ultra Temp series chimney section before insertion…
The Adjustable Pitched Ceiling Plate gives a finished appearance where the chimney passes through a sloped ceiling. Adjustable to fit…
Used in floor/ceiling penetrations other than those which include a ceiling support. Not required when passing through roof.…
Used to trim the ceiling, closing off the airspace around the pipe when the chimney is supported from above and…
The Roof Support Kit includes the roof brackets and hardware only.
Works on all diameters of chimney. Allows freedom to install…
Used with 8T-MH for mobile home installations.…
Universal Interior Resupport assembly allows for two different methods of chimney resupport. The first method is used when an immediate…
For use in existing installations, this part can be installed into the first section of Platinum Series Type HT chimney…
This new design attaches around chimney providing vertical support at the roof. This support assembly has a heavy duty clamping…
For use in new installations, this part can be installed by twist-locking the coupler on the DSAC into the first…
The Anchor Plate provides a secure attachment for the chimney to smoke chamber outlet on masonry fireplaces, reducing footing loads…
A Roof Brace Kit can be used whenever there is a need to stabilize the chimney above the roof level.…
The Insulated Wall Thimble installs quickly and eliminates the need for using individual firestops. The round shielding acts as a…
Flashings are used to seal the opening where the chimney penetrates the roof to divert rain and snow down from…