The Rugged Stainless Steel Chimney That Makes Every Installation Simple, Fast And Sound.
Standard Stainless Steels are used for all insulated parts. The smooth stainless steel inner liner produces rapid stabilization of strong draft and heats fast to minimize condensation as waste gases are exhausted. The insulation in the pipe assures the highest possible inner wall temperature by preventing circulation of air between inner and outer chimney walls. This special insulation filling the space between the stainless steel walls is only 1" thick, yet it provides 17 times the insulating value of brick.
Selkirk’s chimney can be easily installed by one man. The chimney sections have threaded internal couplers that lock together in seconds with a 1/8 turn. Locking Bands are furnished with every pipe length to assure complete joint security. These systems come with a variety of components to meet every installation requirement.
Selkirk Ultra-Temp has been tested to 1700°F. These high temperature tests comply with Underwriter’s Laboratories Safety Standard for Factory-Built Chimneys, UL-103 Sixth Edition.
Limited Lifetime Warranty
Refer to manufacturer’s instructions for proper installation, usage, and maintenance.
Use to assure complete joint security. Allows chimney to be taken apart without damage to the joint so it can…
Made of flexible expanded 18-8 stainless steel mesh with diamond shaped openings roughly 1/2 x 1 inch. Use to keep…
The Storm Collar is designed to fit on the round chimney pipe just above the roof flashing. The upper edge…
The Roof Support Kit includes the roof brackets and hardware only.
Works on all diameters of chimney. Allows freedom to install…
The Wall Band is used along wall to provide for 2-inch clearance and assure stability. Also useful for suspending offsets.…
A Roof Brace Kit can be used whenever there is a need to stabilize the chimney above the roof level.…
The Adjustable Pitched Ceiling Plate gives a finished appearance where the chimney passes through a sloped ceiling. Adjustable for various…
The Joist Shield / Firestop is used to dissipate heat wherever the chimney passes a joist from or into an…
The Insulated Wall Thimble installs quickly and eliminates the need for using individual firestops. The round shielding acts as a…
Used to provide additional support of chimney, especially when using chimney offsets.…
Flashings are used to seal the opening where the chimney penetrates the roof to divert rain and snow down from…
The Anchor Plate provides a secure attachment for the chimney to smoke chamber outlet on masonry fireplaces, reducing footing loads…
The Attic Insulation Shield is required to guard against the hazard of blown-in or blanket insulation occupying the required 2"…
14" Chimney Section has an installed length of 6" and can be intermixed with various lengths to attain virtually any…
The Type HT Wall Support Kit has been tested for use fully enclosed and has been designed in 5", 6",…
Chimney Section has an installed length of 9" and can be intermixed with various lengths to attain virtually any height.…
12" Chimney Section has an installed length of 12" and can be intermixed with various lengths to attain virtually any…
18" Chimney Section has an installed length of 18" and can be intermixed with various lengths to attain virtually any…