Sweeps Perfection Custom Multi-Flue Rain Caps can be ordered to fit the unique dimensions called for by many multi-flue chimneys. These stainless steel custom caps can be sized to fit close to the flue tiles or to extend to the edges of the crown. Sweeps Perfection Custom Multi-Flue Rain Caps offer the same high quality features of our standard multi-flue caps, plus a tailor made fit. To order a custom multi-flue rain cap, you will need the dimensions of the crown and the position, sizes and heights of the flue tiles.
NOTE: Special order products are not returnable. Please double check your measurements.
NOTE: The mounting flange of a multi-flue rain cap extends 1 1/2" on each side of the screen to allow the rain cap to mount to the crown. Rain caps also require a minimum 3” clearance from the top of flue tiles to the cap’s lid.
NOTE: Custom cap orders are subject to shipping and handling charges.
NOTE: Custom caps measuring over 17” Wide or 72” Long require “special packaging” at $20.00 per cap. All caps with L+W greater than 89” must be shipped via common carrier.
Ordering Formula for 8 inch height caps:
(Length x SPKD-L) + (Width x SPKD-W)= CAP COST
Ordering Formula for 10, 12 or 16 inch height caps:
(Length x SPKD-L) + (Width x SPKD-W) + ([Width + Length] x SP-H) = CAP COST
Crown of chimney must be 3" larger than screen.Order Quanity Will Be The Total Length Of Screen Needed.…
Crown of chimney must be 3" larger than screen.Order Quanity Will Be The Total Width Of Screen Needed.…
Extra Height Is Needed When The Flue Tile Extends More Than 5" Above The Crown. Order Quanity Will Be The…