Ultimate Pellet Pipe is a premiere venting system designed with the installer In mind. Fast, sealed and secure assembly coupled with laser-welded seams and smooth joint connections create a pipe system that is sleek and beautiful.No need for silicone sealant with Ultimate Pellet Pipe. The gasket design seals the pipe tight, eliminating the need for silicone at the seams. Offer your customers a superior pellet venting solution, Ultimate Pellet Pipe.
This is a section of Ultimate Pellet Pipe chimney. The length specified is the overall outside length of the chimney…
This is an adjustable length section of Ultimate Pellet Pipe chimney. This will allow for up to 9.5" of installed…
This 45° elbow is used to offset around an obstruction. This must also used with our #2247 Screen Cap for…
This 90° elbow is used to offset around an obstruction.
It is UL listed to standard UL641 as a Type L…
Tees are used to transition chimney from horizontal to vertical orientation. Provides for inspection and maintenance as well. Add our…
The Vacuum Cleanout Cap provides for easy cleaning. It simply replaces the standard tee cap that comes with the 4"…
Wall thimbles are used when chimney passes through combustible wall. When properly installed it maintains required clearances. Painted black.
Wall bands stabilize and support vertical runs of pipe. May also be used for horizontal support as needed. Adjustable from…
This supports Ultimate PelletPipe™ when passing through finished ceiling.
It is UL listed to standard UL641 as a Type L low…
This will provide support and proper clearance by attaching to top of ceiling joists when installing chimney vertically.
It is UL…
Used to support Ultimate PelletPipe™ in a sloped ceiling installation. Trim pieces are provided to cover installation cutout.
It is UL…
Provides proper spacing when Ultimate PelletPipe™ passes through combustible material. Also may be used under soffit on an exterior installation.
Used in attics to maintain clearances to blown-in or blanket insulation. Adjustable 12.5" to 23.5" above the joist it attaches…
Finishing plate to be used on a ceiling or sidewall. Maintains clearance to combustibles.
It is UL listed to standard UL641…
Used to weatherproof chimney installation through flat roof. Base is 16" x 16".
It is UL listed to standard UL641 as…